## MSBTE Automobile Engineering Sample Test Papers | MSBTE Automobile Engineering 20Marks Sample Papers | MSBTE AE Test Papers

Sample Test Paper – I

Course Name :- Automobile Engineering
Course code :- AE/PG/PT/ME/MH/FE
Semester :- Third
Subject :- Mechanical Engineering Drawing
Duration :- 1.5 hours Marks: 20
Q.1] Attempt the following (6)
a) Figure. -I shows Front View and partial Auxiliary View of an object. Complete Top
View.
Q.1] Attempt the following (6)
a) Figure. -I shows Front View and partial Auxiliary View of an object. Complete Top View.

a) Figure –II shows Front View and Top View. Complete the partial Auxiliary View of given object.

b) The inside of a hopper is to be lined with tin sheet. The top and bottom of the hopper are regular pentagons with each side equal to 450 mm and 300 mm respectively. The height of hopper is 450 mm. Draw the shape to which tin sheet is to be cut. (6)

Q.2] Attempt any one of the following (8)
a) A vertical cone of 80 mm diameter and 100 mm long is penetrated by a horizontal cylinder. The axis of cylinder is parallel to both the reference planes and is 5 mm away from the axis of cone. The cylinder axis is 30 mm above the base of cone and diameter of cylinder is 40 mm. Draw the projections showing curves of intersection.
b) A square prism of 45 mm side stands vertically with its rectangular faces equally inclined to VP. It is penetrated by a horizontal triangular prism of 35-mm side of base such that their axes bisect each other at right angles. Draw the projection showing lines of intersection, when the rectangular face of triangular prism is parallel to VP and is away from the observer.